EANS PLAST - PROFESSIONAL PVC SHEET BOARD EXTRUDER
Hot line: +86-18963696671
EANS PLAST - PROFESSIONAL PVC SHEET BOARD EXTRUDER
Hot line: +86-18963696671
Eans machinery supply whole PVC wall panel production line which includes providing the formula of PVC wall panel,production cost of PVC wall panel,technical service etc.Please see following production cost of PVC wall panel.
The production cost of PVC wall panel:
No | Item | Dose/formula | Unit price of material in $/ kg | Cost of each material in on batch |
1 | PVC resin (SG-5) | 50kg | 0.965$/kg | 48.25$ |
2 | Caco3 (1250 mesh) | 100kg | 0.1$/kg | 10$ |
3 | Stearic acid | 0.9kg | 1.250$/kg | 1.125$ |
4 | Paraffin | 0.6kg | 1.325$/kg | 0.795$ |
5 | Titanium dioxide | 1.3kg | 2.263$/kg | 2.9419$ |
6 | Brightener | 30g | 17.5$/kg | 0.525$ |
7 | CPE | 2.8kg | 1.441$/kg | 4.0348$ |
8 | Stablizer | 3kg | 1.765$/kg | 5.295$ |
158.63kg | 72.9667$ | |||
72.9667$/158.63kg=0.4599$/kg(cost/kg) | ||||
(Note:The production cost depend on raw material price.If the price of raw material is lower,the production cost will be lower.)
The weight of per PVC wall panel 3.8kg (250mm width,5.8m length).
Raw material cost per PVC wall panel=0.4599*3.8=1.74762$.
Cost of hot stamping:0.56$/m2
Cost of lamination:0.65-0.75$/m2
The raw material cost of 250mm *5800mm with hot stamping=raw material cost+hot stamping cost=1.74762$+0.56*1.45=2.559$/panel
The raw material cost of 250mm *5800mm with lamination =raw material cost+lamination cost=1.74762$+0.65*1.45 to 1.74762$+0.75*1.45=2.69$-2.835$/panel
